TRANSFER:  Santa Head - Christmas Polka Dot
Elefant Tailz

TRANSFER: Santa Head - Christmas Polka Dot

Regular price $1.00 $0.00

Size (ALL MEASUREMENTS ARE ESTIMATES AND WILL VARY BY DESIGN):

  • Pocket - approximately 3.5-4 inches on longest side
  • Youth - approximately 8.5-9 inches on longest side
  • Adult - approximately 10.5-11 inches on longest side

HEAT PRESS REQUIRED!  You must have even time and temp in order for proper application for both sublimation and white toner transfers.

SUBLIMATION TRANSFER INSTRUCTIONS:

  • HEAT PRESS REQUIRED! You must have even time and temp in order for proper application.
  • You must use a shirt that is AT LEAST 65% polyester.  Cotton fibers won’t accept the dye from the sublimation ink, only the polyester fibers. The higher the polyester count, the better!  Any shirt less than 65% will provide a muted vintage look.
  • You need to apply the transfer to a light colored shirt. Inks won’t show up on dark color shirts.
  • Sublimation transfers do not print white ink, any part of the design that is white will be the color of the shirt.
  • Use parchment paper or butcher paper! Place a sheet of parchment paper, at least the size of the transfer inside your shirt.  This will keep the dye from bleeding through and dying the back of the shirt.  ALSO cover the top of the transfer with a piece of butcher paper to protect your press.

Sublimation Directions:

  • Temperature: 400 degrees Fahrenheit
  • Time: 60 seconds
  • Pressure: MEDIUM Pressure
  • Peel: HOT/immediately

WHITE TONER TRANSFER INSTRUCTIONS:

  • White toner transfers are great for most fabric and colors.  You may use them on 100% cotton, poly-cotton blends, and 100% polyester. 
  • HEAT PRESS REQUIRED! You must have even time and temp in order for proper application.
  • Place the transfer on your garment and secure the corners with heat resistant tape.
  • Press at 300 degrees for 30 seconds with medium pressure.
  • Remove from press, and allow garment to cool completely.
  • Slowly start at a corner and roll off the transfer. Print will have a shiny appearance (this is normal).
  • Finishing press: It is very important to repress the transfer properly to soften the touch and increase washability. It will also remove the shine and give your transfer a matte finish.  Cover image completely with a piece of parchment paper.  Press again at 300 degrees for 30 seconds with medium pressure.  Peel immediately.